How To Stop Someone From Using Your Wifi
By blocking unauthorized MAC address
Do you know how to stop someone from using your WIFI by blocking unauthorized Mac address? Here are a few tips. Knowing your IP address is very important as you will need this to open your interface.
Again, if you are using MAC, you can find your IP address by opening the Apple Menu then select “System Preferences”. You will see a Network icon, click this. You will find the word “Router”, and beside this word is your IP address.
If you are using a PC, press the “Windows” and “R” keys at the same time. A command window will pop up, type “ipconfig” and press “Enter”. Look for the phrase “Default Gateway”, and beside this is your IP address.
Type this on the address bar above and press enter. Once you have gained full access to your wireless connection’s interface, you can check for uninvited guests depending on the manufacturer and model of your router.
Another tip is to check on your router’s LAN or DHCP settings, where you will find who else are connected on your WIFI including your own computer. Block unauthorized addresses on the “Security Settings” or “Firewall Settings”.
By using some applications
Use the app, WIFIKill, developed by Bartosz Ponurkiewicz. Some other applications may be helpful but are time-consuming. WIFIKill allows you to easily and quickly stop a freeloader from using your precious bandwidth. You will need a Nexus 7 or an android 4.0 or higher and a WIFIKill downloader app in order to install this on your device.
The good news is you can download the free version of the app, but the bad news is that you can only kick that someone off your WIFI for five minutes and there will be ads popping out with it.
You can also opt to the regular version which will cost you a few dollars but allow you to block those unwanted hoppers for an unlimited time, plus giving you an ad-free screen.
Once you have acquired the program, simply open it, and click “kill” beside the IP address of the intruder.
This application is the same as WIFIKill. The only difference is that WIFIKill just requires you to have a phone but Netcut allows you to analyze, see and change the MAC addresses of those who are hopping on your internet.
So how to kick someone off your WIFI with Netcut? Just disconnect him or her on PC through this application. It is compatible to Widows 7, 8 and 8.1. But before going on with the steps on how to use Netcut, be reminded that this should not be used on public internet connections.
Using Netcut is very easy:
-Simply download the program and install it on your PC. Just follow the prompts popping up on your web interface.
-Once you have successfully installed the app, restart your PC and click on the Netcut icon.
-Then you can see the list of all the devices connected to your WIFI and just simply click “cutoff” which is a button beside the device that you would like to disconnect.
You will see the blue button turn red which means it has lost its connection. Just click the”resume” button if you want to reconnect the device on your WIFI.